https://www.pinterest.ru/nazirov2128506/pins/ https://www.facebook.com/people/Hand-Madiya/100005653278410 https://www.instagram.com/bagsewtutorial/ 79273134064@yandex.com https://follow.it/diy-tutorial-idease?action=followPub

Wonky Star Quilt Block Tutorial

Wonky Star Quilt Block Tutorial

Here's a simply tutorial on how to make a 12.5" wonky star block. Easy Wonky Star Quilt Block Tutorial.



UPDATED NOTE: I wrote this tutorial, in an attempt to make the process as straight forward and simple to follow as I possibly could. However, please know that if you use triangle shapes cut a bit larger, ( by an inch or two) you will have more leeway in how you position them and more possibilities in getting your star to be EXTRA wonky!

You will need to start with 13 squares of fabric each cut 4.5"
Out of these 13 squares you should have:
~ 8 white or cream, (these will be for the background)
~ 4 any color/pattern you choose, (these will be for the star points)
~ 1 any color/pattern you choose, (this will be the center of the star)

 

Stack the 4 star point squares and slice in half so you have 8 triangles...

Select 4 of the background squares and 4 of the star point triangles. Stitch one triangle to the right side of each background square. 

Changing the angle of the triangles will help create the wonky-ness of the star. 

(Make sure that when the triangle is flipped and ironed to the correct side, it extends past the edges of the background square.)

Cut the excess background fabric off... 

Flip the star point triangle to the right side and press with a hot iron...

Sew the remaining 4 triangles to the left side of these 4 background blocks. You can overlap the triangles slightly at the bottom, or leave a space. Each variation just adds to the wonky-ness...

Again, cut off the excess fabric as shown...

and flip the star point triangle to the left side and press with a hot iron...

Cut off all excess fabric, making the squares 4.5" again...

Take your center square and using a scant, (just under) 1/4" seam allowance, stitch a completed star point square to both the left and right side as shown...

Take one of the remaining star point squares and again using a scant 1/4" seam allowance, sew a plain background square to both the left and right sides. Repeat with the 3 remaining squares...

Wonky Star Quilt Block Tutorial

Press and iron all 3 rows. (Because the background is light in color it's best to iron the seams towards the star points. Do this with the center row as well, thus helping to reduce bulk when all three rows are joined together)...

Wonky Star Quilt Block Tutorial

Line up the seams, pin and using a scant 1/4" seam allowance, stitch the top row to the middle row. Repeat with the bottom row...

Wonky Star Quilt Block Tutorial

Iron the seams towards the top and bottom rows. Flip to right side and smile at your completed wonky star!... 

 

Circle of Wonky Stars Tutorial




Circle of Wonky Stars Tutorial

 The size of the block is 10 1/2″ by 10 1/2″. So it would be 10″ sewed. For an idea about how big the stars are, the centers are 1″. 

Note: I did not use half triangles when sewing on the points I just used squares. It works the same. Her way saves fabric, mine saved time :)

First when making my designs I always start with graph paper. I love graph paper. 


 Please ignore all the miss spelled words. I am the worse speller ever!

After drawing my design I then figure out the measurements for all the pieces and write it down. When making the initial design I make sure I assign a measurement to one square. In this one it was one square equals 1/2″. I normally like to do one square equals 1/4″ but it would not fit on one sheet of paper.

Here are the pieces you will need to make the square:

Background color

16 – 1 1/2″ x 1″ for the rectangle background pieces

32 – 1 1/2″ x 1 1/2″ for the point background

1 – 4 1/2″ x 4 1/2″ for the background center

4 – 2 1/2″ x 2 1/2″ for the background corners

8 – 1 1/2″ x 3″ for the border background rectangles.

Stars

You will need 8 different colors. You will need from each color:

9 – 1 1/2″ x 1 1/2″ for a total of 72 squares


 Ignore the fabric on the far left that was for the other block :)

Now for the piecing.

1. Make all the points for the stars like in the tutorial. You will have four completed squares for each color for a total of 64 squares.

2. Lay all pieces out so you can stay organized.


 3. Sew the pieces in red together first.


 4. Now sew these pieces in red together.


 5. Now sew the pieces together in each color group.


 6. Now sew dark blue to light blue, then add the green chunks. Then add to that the yellow chunks. All that is left is to sew the red chunks on and now you are done!

 

Circle of Wonky Stars Tutorial

 

 

Wonky Star Quilt Block Tutorial

Share this :

0 comment:

Post a Comment