https://www.pinterest.ru/nazirov2128506/pins/ https://www.facebook.com/people/Hand-Madiya/100005653278410 https://www.instagram.com/bagsewtutorial/ 79273134064@yandex.com https://follow.it/diy-tutorial-idease?action=followPub

Ribbon Star Block Tutorial

Ribbon Star Block Tutorial

This is my take on a traditional Christmas Star block. It would look pretty great in holiday fabric, but I would hate to see it pigeon-holed as strictly that, so I’m calling it Ribbon Star. The tutorial makes a 12.5″ block.



Cutting:

Background (white):
• Cut four 3″ squares
• Cut eight 2.5″ squares
• Cut eight 2″ squares

Star (yellow):
• Cut one 4.5″ square
• Cut eight 2.5″ squares

Color A (pink):
• Cut four pieces, 2.5″ x 4.5″
• Cut four pieces, 2″ x 4.5″

Color B (orange):
• Cut four pieces, 2.5″ x 4.5″
• Cut four pieces, 2″ x 3″

To make the block:

1. Mark the wrong side of all of your 2.5″ and 2″ squares with a diagonal line from corner to corner.

2. Lay out your pieces before you start sewing. I find it helpful to work from this layout as I sew—you’ll be far less likely to get your colors and directions mixed up! Start with the 4.5″ square in the center, and then lay out the 2.5″ x 4.5″ pieces in a cross shape, alternating colors as shown.

Ribbon Star Block Tutorial

3. Now add the 3″ background squares in each corner, and the 2″ strips around those squares, as shown.

Ribbon Star Block Tutorial

4. Next, lay out the squares that will be your star points. I put these squares face down, so I can see the marked diagonal (this is also exactly how the pieces will be sewn together). Note that to create the star points, the marked diagonals should always go from the center out.

5. Sew each pair together on the marked diagonal.

6. Trim off the excess 1/4″ from the seam and press. I always press diagonal seams open—I find it to be more accurate than pressing to the side.

Ribbon Star Block Tutorial

7. Add your 2.5″ background squares in the same way you did with the star points. Note that the marked diagonal should always go the same direction as the star-point diagonal that you previously sewed.

Ribbon Star Block Tutorial

8. Add your final set of 2″ marked squares in the same way as you did the previous squares. This time, make sure the marked diagonals are angled so that they form the outer star points.

Ribbon Star Block Tutorial

9. Your units should now look like this. Sew the block together, starting with the 2″ x 3″ orange units to the 3″ background squares. Take care as you sew to make sure those points are lined up!

Ribbon Star Block Tutorial

10. Done!

Since I made five of these blocks for my 4×5 hive, here it is in other colors:

Ribbon Star Block Tutorial

Ribbon Star Block Tutorial

Ribbon Star Block Tutorial

Ribbon Star Block Tutorial

Share this :

0 comment:

Post a Comment