Phone Charger Pouch Tutorial

Compact and Functional Charger Pouch Tutorial. Charger Storage Bag FREE  Sewing Tutorial.

 

Supplies:
- Light-colored fabric: 30 x 20 cm;
- Dark-colored fabric: 30 x 20 cm;
- Batting (fleece/wadding): 30 x 20 cm;
- Dark-colored bias tape: 4 x 70 cm;
- 1 zipper (25 cm).

Instructions:
1. From each rectangle, cut two 20 x 8 cm rectangles and one 20 x 14 cm rectangle.

Photo 1

 

Photo 2

 2. The zipper is intentionally larger. Position the light-colored print and the fleece along one edge of the zipper, on the side with the slider. 

Place the dark-colored print in the same position, underneath the zipper. In each case, the right side of the fabric should be facing the zipper. Stitch in place. (photo 2)

Photo 3

 

Photo 4

 3. Turn over and press. Do the same on the other side of the zipper. Add a topstitch as shown in photo 4.

Photo 5

 

Photo 6

 4. Open the zipper so that the slider is positioned inside the case. Stop the zipper at the edge, as shown in photo 5.

5. Trim both edges so that the top of the case is exactly the same size as the bottom = 14 x 20 cm.

6. Trim the zipper, ensuring that the slider remains inside the case.

7. Assemble the bottom of the case: dark fabric, batting, and light-colored fabric.

8. Mark the 4 rounded corners and trim them.

9. Stitch all the way around using a straight stitch, 4 mm from the edge, catching all layers.

10. Finish the edges with a zigzag stitch, taking care not to overlap the straight-stitched line.

 

Photo 7

 

Photo 8

 11. Cut a 4 cm square from the bias binding and create a loop at the edge, as shown in photo 7. 

 12. Position the bias binding as shown in photo 8. Stitch it in place 6 mm from the edge.

Photo 9

 

Photo 10

 13. Turn it over, press it, and pin it in place. Stitch it from the right side, on the light-colored section, along the edge of the dark bias binding.