I am getting a bit addicted to making pouches and zipper purses and I thought that just in case you are too, you might like to have a pattern for a very handy little purse - it could be a pouch if it were bigger so it is up to you what you call it.
I love this easier method of putting the zip in and I think that you will too!
Loving the tie dye trend about at the moment and with that vibe in mind, I thought that I would add a gold embellishment with a die cut peace symbol.
But of course, me, being me, I have yet another bee in my bonnet and that is that I wondered if we need printable templates for everything? The answer is of course, not! I hear so many horror stories about printing them off and getting them right. We can make our own really easily and have little bother with worrying about printing things off correctly and sizing issues- how much freedom is that!
Devil is in the detail peeps. Make sure that the back has a point of interest to. For me, it is a label to show where it was made.
So let's get started and will show you how to make this little purse template free!
To begin with, let's gather some supplies....
-F8th tie dyed fabric. You can make your own but I am going to upcycle a pillowcase that I have never used.
--Ftth lining fabric. Mine is Soda Straws from the Boardwalk Delight collection by Dana Willard for Art Gallery Fabrics (Hantex)*
--F 8th H630 light wadding (Vlieseline)*
-4" navy metal zipper
-small scrap of leather for the zipper pull
-Union Jack ribbon (Berisfords)*
-bright gold iron on foil
-peace symbol die. I am using the Sizzix #662165A
-Sizzix Big Shot manual die cutting machine*
-F8th Hemline Squared Pattern Paper*
-Your usual sewing needs
Right - let's get the template making bit out of the way first. Oh and by the way, due to popular request, my patterns on here will now be all in imperial measurements.
Begin by drawing a 6 1/4" long x 5 1/4" wide rectangle...
The squares may not all match up. Don't worry too much about it for this make.
Now find something round which is about 6" diameter. This can be a plate, or a cup or anything at all. Round off the bottom of the rectangle...
A side plate makes a perfect 'thing' to draw around and every house has at least one!
Don't worry if it is not super perfect. I will show you the universal designer's trick to fixing it in a minute...
This is what we have now.
Cut the rectangle out now...
Don't round the corners yet!
You can see by the squares that it is not absolutely perfect on the bottom...
Hmm...needs some surgery...
There is a really easy fix used by just about every designer at some point in their careers.... simply fold the pattern in half...
Just choose one of the curves to cut. This will guarantee symmetry every time.
Off it comes!
When you unfold it, you can see where the right hand line went a bit awry? It doesn't matter. it is all fixed now and ready to go! Just ignore it.
That's it! That is your template and you can use it again and again and it already has the 1/4" seam allowance included. I did say that it was easy! It actually took longer to show than to do.
Now use the template to cut two outer panels, two lining and two interfacing...
One size fits all!
Fuse the interfacing to the wrong side of the outer panels...
Don't worry about the interfacing being in the seam allowance, just cut it the same size and iron it on!
Let's put the peace symbol on next. Cut the symbol using the iron on foil and the die and Big Shot
I needed a few passes but it came out beautifully.
Iron it on to one of the outer panels using the manufacturer's instructions and remove the protective plastic
I just love this stuff! It makes everything you do look professional.
The panel is now ready to use. Let's prep the zipper next - don't worry, that is really easy with my method too. Begin by cutting a piece of lining 2" wide x 4" long. This is longer than you need but it is easier to handle and you can trim it. Fold the strip in half lengthwise and crease the middle...
The seam roller is so much easier than running to the iron for every little thing.
I am using a Clover brand seam roller which I have lately found to be super useful for making creases like this (as well as flattening seams).
Fold the two raw edges to the centre crease...
No really easy way to show this but I think that you get the idea.
You have essentially made a piece of straight binding.
Now bind the ends of the zipper and trim the excess away so that the binding is the same width as the zipper.
Bind each end of the zip.
By the way, I don't sew this anymore. I sued to but it is fiddly and my machine does not like it one bit. I sew and clip now and it works beautifully. because it is such a narrow part once the pouch is sewn up, it all holds perfectly.
TIP: Some zippers are a bit long and you will need to trim the end tapers to about 1/2".
Time to put the zipper in. Take one outer panel and one piece of lining and place them right sides together with the zip sandwiched in between...
The vertical pins at either end of the zip remind you where to start and stop sewing.
Sew from one bound end of the zipper to the other only without going over. This is the important bit which will make the bag come together at the end. Repeat for the other side.
Open the panels out so that the zip is exposed and topstitch, again only going from zipper end to zipper end on both sides...
The topstitching also goes from one bound end of the zip to the other.
Now open the whole thing out and place outer to outer and lining to lining right sides together and pin.
Leaving a turning gap in the lining, sew right around the very edge with a normal 1/4" seam allowance...
It is more usual to avoid putting the turning gap on a curve but here we have no choice. Don't worry, it doesn't present too many problems.
By the way...have the zipper open for this bit or you will have to unpick the outer, get your hand in there and wiggle it open - the zip has to be open so that you can turn the pouch the right way out!
Here in contrast thread, you can see how big the gap should be.
Before turning out, clip the curves with a sharp pair of scissors, being very careful not to clip the seam...
This reduces bulk and means that your pouch will have a lovely smooth curve.
Turn out through the gap and close the it. Push the lining down into the pouch.
There we go! I have added a piece of leather to the zipper pull which is about 1/4" wide and 4" long (it can be trimmed if it looks ridiculous)...
I love that gold die cut peace sign. I think that it makes it!
As you can see, I also added a Union Jack flag to the back of mine to show where it was made...
That is one of the easiest ways to make a pouch and you have the added bragging points that you also made the pattern.
0 comment:
Post a Comment