Original cover for the tablet per hour
What are you wearing your mobile device? Today there are a lot of various mobile storage devices, but I want to offer you a special option - you can make a stylish cover in an hour, with your own hands.
• A felt sheet of any color.
• Ruler.
• Pins.
• Mulina contrasting to the color of felt shades.
• Scissors.
• Knife on fabric (optional).
• Needle and thread.
We measure the length and width of the device. For these dimensions, draw a rectangle on the felt so that it wraps the tablet on both sides. In addition measure about 5 cm from one edge to the cover of the cover. We cut out.
The cover will be like a wicker basket. For this we need to draw strips under the notches. We draw on the rectangle two striped squares, having retreated on one side 5 cm, on the other side 1 cm. Between the squares we leave a not drawn gap of 3 cm.
We cut the strips in squares with scissors. If you have a knife on the fabric, then you can cut these strips to them under the ruler.
We fasten the halves of the rectangle with pins so that the squares with the strips are opposite each other.
We cut from remnants of a felt sheet long strips on width the same, as in squares on a cover. Make the strips long enough that they can bend the entire canvas and are woven into squares on both sides.
We begin to weave strips.
Dock the strips close to each other.
It turns out that such a network.
Now cut off the sticking ends.
Fix the ends of the strips from the inside with a needle and thread. It turned out here is such a cover.
We decorate it with contrasting crosses from a floss.
Everything, your stylish and original cover for the tablet is ready!
In such a case the device will be safely stored and will be able to please you with its impeccable appearance for a long time.
What are you wearing your mobile device? Today there are a lot of various mobile storage devices, but I want to offer you a special option - you can make a stylish cover in an hour, with your own hands.
Case for tablet
What you need to work:• A felt sheet of any color.
• Ruler.
• Pins.
• Mulina contrasting to the color of felt shades.
• Scissors.
• Knife on fabric (optional).
• Needle and thread.
We measure the length and width of the device. For these dimensions, draw a rectangle on the felt so that it wraps the tablet on both sides. In addition measure about 5 cm from one edge to the cover of the cover. We cut out.
The cover will be like a wicker basket. For this we need to draw strips under the notches. We draw on the rectangle two striped squares, having retreated on one side 5 cm, on the other side 1 cm. Between the squares we leave a not drawn gap of 3 cm.
We cut the strips in squares with scissors. If you have a knife on the fabric, then you can cut these strips to them under the ruler.
We fasten the halves of the rectangle with pins so that the squares with the strips are opposite each other.
We cut from remnants of a felt sheet long strips on width the same, as in squares on a cover. Make the strips long enough that they can bend the entire canvas and are woven into squares on both sides.
We begin to weave strips.
Dock the strips close to each other.
It turns out that such a network.
Now cut off the sticking ends.
Fix the ends of the strips from the inside with a needle and thread. It turned out here is such a cover.
We decorate it with contrasting crosses from a floss.
Everything, your stylish and original cover for the tablet is ready!
In such a case the device will be safely stored and will be able to please you with its impeccable appearance for a long time.
0 comment:
Post a Comment