Here's my Contrast Fabric Wash Bag Sewing Tutorial. I lined the wash bag with a waterproof lining and used a oilcloth fabric for the base so that it was super practical!
You will need...
snow days, winter wonderland collection fabric in blue
stone spot oilcloth
pu coated nylon waterproof fabric
1 nylon closed end zip (20cm long)
stitched ribbon (10cm length)
How-to step by step...
Start by cutting out the following pieces as above, including one panel of lining 22cm wide by 22cm long.
Stitch the fabric panels together using a 1cm seam allowance, ensuring that if you are using a one way print (ie only looks good in one direction) make sure that the are placed in different directions as the snow print fabric in the above illustration.
Place the waterproof lining panel, right sides together with the outer stitched panels and using a 1cm seam allowance stitch them together along the short sides.
Turn the panels so the right sides face outwards. Top stitch the lining to the outer panels along the seams.
Pin the zip to the top edge, so that the teeth are just showing. Stitch in place.
Repeat with other side of zip, so zip is enclosed at the top panels.
Turn the washbag the wrong way out, and stitch down the side seams, using a 1cm seam allowance. Pinking shear or overlock the raw edges.
Cut a square of fabric from each side of the base as above illustration. 2.5cm x 2.5cm. Then rearrange the corner so that the bottom and the side seam are aligned, using the raw edges as a guide. Using a 1cm seam allowance stitch a straight line across the base.
Turn the wash bag right side out and thread the ribbon through the zip pull, knot ends and voila!