

YOU WILL NEED:
Leather, neoprene 0.55 m wide, 140 cm wide, matting 0.45 m wide 160 cm wide, flizofiks, lightning (35 cm), 3-step buckles, measuring tape, thread, tailors and pins for leather, scissors, paper, ruler, pencil, 2 pens with carbines (2x85 cm).
STEP 1
On paper, draw the details of the paper pattern: a circle with a radius of 14 cm, a rectangle A 33 x 23 cm, a rectangle B (leather bar) 13 x 43 cm. Allowances for seams are already taken into account.
STEP 2
Cut out 1 parts of a circle from neoprene, matting and flizofix (details of glue), 2 parts of rectangle A from matting and neoprene, 1 detail of rectangle B from leather, neoprene and flizofix (details of glue).

STEP 3
Complete the side seam of the strap (rectangle B), seam the seam allowances. Circle pin to the plank and attach with a 1 cm seam allowance.
STEP 4
Rectangle A: 2 pieces of the matting and neoprene, stitch over long cuts. Pin the zipper on the wrong side, leaving the cuts of the parts of the backpack open.

STEP 5
Dip 2 strips of 44 x 2 cm in size from the skin. Attach a flizofix to each stripe on the wrong side. Strip run to cut the details of the backpack along the zipper, attach.
STEP 6
Draw a detail for the buckles: 2 rectangles 6 x 4.5 cm each and the connecting part 2 x 2 cm. Cut the detail 2 times from the skin hardened with flizofix.

STEP 7
Slip each buckle into the part (step 6), press to the zipper and along the side seams, attach it to the edge.
STEP 8
The third buckle with leather loops (2.5 x 5 cm) sewn to the leather strap. Then the strap sewn to the details of the mat and neoprene.

0 comment:
Post a comment